HOWTO.gpio-commands

Revision
--------
0.1 2016-06-11

Intro
-----
GPIO General Purpose IO described here is to sue control external 
devices. 


Access
-------
pb1 and pb2 are part of 6-pin ISP-connector.


Usage
-----
Note! pb1 is not saved in EEPROM and is used by bulk mode 
for trigger external devices as radios etc.

pb2 is stored in EEPROM and is controlled by command
pb2 [on|off] in firmware.


Example
-------
pb2 on 
 
Report & Monitor
----------------
pb1 and pb2 status can be monitored by normal report
Set report pb1, pb2