8.6 Fix for RIME addr duplication. Only HW rev 2.4 affected 8.5 Automatic report probing improved. Reset eeprom by button for rev2.4 8.4 Pushbutton for rev2.4 auto report improved BME2808.4 8.3 BME280 fixes incl RH. Bootcause printed 8.2 Support for Bosch BME280 added 8.1 Watchdog update. Command wdt [on|off|test]. Default off. 8.0 i2c fixes for ms5611 and delay in i2c probing. 7.9 None 7.8 i2c default speed now 10 kbit/s. Added sanity check when reading i2c-speed from EEPROM. 7.7 Reports for GPIO pb1 and pb2 added. 7.6 Periodprintouts removed 7.5 Bulk setting: Pin low after (UART) bulk tansfer. 7.4 Bulk default settings 0 0