Version 1.0 2023-10-19
	
GW-test procedure
=================

RPI connections:
----------------
 Power
 USB AVR programmer
 USB cable to power GW
 Ethernet cable to a access point to get DHCP address via DHCP

RPI login:
---------
 Via ssh (You have to find the RPI IP nummer)

User & passwd:
-------------
pi@raspberry


Procedure to test basic HW functions after assembly:
----------------------------------------------------

1a) Flash the MCU serial bootloader via ISP programmer
1b) Flash application gw.exe via the serial bootloader

RPI Script:
-----------
sudo ./Program-sensor-16M-115k.sh 
 
2a) Verify flashing is done correctly
2b) Verify LEDs and blue GW LED should blink


Tips!
You can verify and test with the provided assemble prototype.
(Which has a Swedish SIM from Tele2) 

Also a photo of the setup is provided and a programming log.


Good luck!
Any questions to robert@radio-sensors.com

Repository:
http://www.radio-sensors.com/download/gw-test/
http://www.radio-sensors.com/download/gw-test/README.md