sudo ./Program-sensor-16M-115k.sh 

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1ea802
avrdude: erasing chip
avrdude: reading input file "stk500boot_v2_mega256rfr2-16M-115k.hex"
avrdude: input file stk500boot_v2_mega256rfr2-16M-115k.hex auto detected as Intel Hex
avrdude: writing flash (256080 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 256080 bytes of flash written
avrdude: verifying flash memory against stk500boot_v2_mega256rfr2-16M-115k.hex:
avrdude: load data flash data from input file stk500boot_v2_mega256rfr2-16M-115k.hex:
avrdude: input file stk500boot_v2_mega256rfr2-16M-115k.hex auto detected as Intel Hex
avrdude: input file stk500boot_v2_mega256rfr2-16M-115k.hex contains 256080 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 256080 bytes of flash verified

avrdude: safemode: Fuses OK (E:F6, H:98, L:46)

avrdude done.  Thank you.


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1ea802
avrdude: reading input file "0x98"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0x98:
avrdude: load data hfuse data from input file 0x98:
avrdude: input file 0x98 contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: 1 bytes of hfuse verified
avrdude: reading input file "0x46"
avrdude: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0x46:
avrdude: load data lfuse data from input file 0x46:
avrdude: input file 0x46 contains 1 bytes
avrdude: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: 1 bytes of lfuse verified
avrdude: reading input file "0xfe"
avrdude: writing efuse (1 bytes):

Writing |                                                    | 0% 0.00s ***failed;  
Writing | ################################################## | 100% 0.41s

avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xfe:
avrdude: load data efuse data from input file 0xfe:
avrdude: input file 0xfe contains 1 bytes
avrdude: reading on-chip efuse data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0xf6 != 0xfe
avrdude: verification error; content mismatch

avrdude: safemode: efuse changed! Was fe, and is now f6
Would you like this fuse to be changed back? [y/n] 
avrdude: safemode: Fuses OK (E:FE, H:98, L:46)

avrdude done.  Thank you.


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1ea802
avrdude: reading input file "0xEF"
avrdude: writing lock (1 bytes):

Writing |                                                    | 0% 0.00s ***failed;  
Writing | ################################################## | 100% 0.41s

avrdude: 1 bytes of lock written
avrdude: verifying lock memory against 0xEF:
avrdude: load data lock data from input file 0xEF:
avrdude: input file 0xEF contains 1 bytes
avrdude: reading on-chip lock data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0x2f != 0xef
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK (E:F6, H:98, L:46)

avrdude done.  Thank you.


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1ea802
avrdude: erasing chip
avrdude: reading input file "gw.elf"
avrdude: input file gw.elf auto detected as ELF
avrdude: writing flash (101418 bytes):

Writing | ################################################## | 100% 16.38s

avrdude: 101418 bytes of flash written
avrdude: verifying flash memory against gw.elf:
avrdude: load data flash data from input file gw.elf:
avrdude: input file gw.elf auto detected as ELF
avrdude: input file gw.elf contains 101418 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 11.30s

avrdude: verifying ...
avrdude: 101418 bytes of flash verified

avrdude: safemode: Fuses OK (E:46, H:98, L:46)

avrdude done.  Thank you.

pi@raspberrypi ~ $ 
pi@raspberrypi ~ $ 
pi@raspberrypi ~ $ cat > flash.log


udo ./Program-sensor-16M-115k.sh 

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1ea802
avrdude: erasing chip
avrdude: reading input file "stk500boot_v2_mega256rfr2-16M-115k.hex"
avrdude: input file stk500boot_v2_mega256rfr2-16M-115k.hex auto detected as Intel Hex
avrdude: writing flash (256080 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 256080 bytes of flash written
avrdude: verifying flash memory against stk500boot_v2_mega256rfr2-16M-115k.hex:
avrdude: load data flash data from input file stk500boot_v2_mega256rfr2-16M-115k.hex:
avrdude: input file stk500boot_v2_mega256rfr2-16M-115k.hex auto detected as Intel Hex
avrdude: input file stk500boot_v2_mega256rfr2-16M-115k.hex contains 256080 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 256080 bytes of flash verified

avrdude: safemode: Fuses OK (E:F6, H:98, L:46)

avrdude done.  Thank you.


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1ea802
avrdude: reading input file "0x98"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0x98:
avrdude: load data hfuse data from input file 0x98:
avrdude: input file 0x98 contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: 1 bytes of hfuse verified
avrdude: reading input file "0x46"
avrdude: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0x46:
avrdude: load data lfuse data from input file 0x46:
avrdude: input file 0x46 contains 1 bytes
avrdude: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: 1 bytes of lfuse verified
avrdude: reading input file "0xfe"
avrdude: writing efuse (1 bytes):

Writing |                                                    | 0% 0.00s ***failed;  
Writing | ################################################## | 100% 0.41s

avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xfe:
avrdude: load data efuse data from input file 0xfe:
avrdude: input file 0xfe contains 1 bytes
avrdude: reading on-chip efuse data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0xf6 != 0xfe
avrdude: verification error; content mismatch

avrdude: safemode: efuse changed! Was fe, and is now f6
Would you like this fuse to be changed back? [y/n] 
avrdude: safemode: Fuses OK (E:FE, H:98, L:46)

avrdude done.  Thank you.


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1ea802
avrdude: reading input file "0xEF"
avrdude: writing lock (1 bytes):

Writing |                                                    | 0% 0.00s ***failed;  
Writing | ################################################## | 100% 0.41s

avrdude: 1 bytes of lock written
avrdude: verifying lock memory against 0xEF:
avrdude: load data lock data from input file 0xEF:
avrdude: input file 0xEF contains 1 bytes
avrdude: reading on-chip lock data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0x2f != 0xef
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK (E:F6, H:98, L:46)

avrdude done.  Thank you.


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1ea802
avrdude: erasing chip
avrdude: reading input file "gw.elf"
avrdude: input file gw.elf auto detected as ELF
avrdude: writing flash (101418 bytes):

Writing | ################################################## | 100% 16.38s

avrdude: 101418 bytes of flash written
avrdude: verifying flash memory against gw.elf:
avrdude: load data flash data from input file gw.elf:
avrdude: input file gw.elf auto detected as ELF
avrdude: input file gw.elf contains 101418 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 11.30s

avrdude: verifying ...
avrdude: 101418 bytes of flash verified

avrdude: safemode: Fuses OK (E:46, H:98, L:46)

avrdude done.  Thank you.

pi@raspberrypi ~ $